If you’re asking what is fcc certification for electronics, here’s the short answer: it’s the FCC’s proof that a device’s radio emissions meet US rules before sale. Some products need formal certification; others rely on a maker’s self-declaration.
For the wider market context, read the consumer electronics industry overview.
| Item | Value |
|---|---|
| Legal basis | Section 302 of the Communications Act of 1934 |
| Scope | Any product that emits RF radiation (Part 15) |
| Incidental radiator threshold | RF energy exceeding 9 kHz |
| Self-declaration rule effective | November 2, 2017 |
| Standard a certifying body must satisfy | ISO/IEC 17025 |
| Electronic label access | No more than three sequences from the settings menu |
These figures come from the Federal Register rule of November 2, 2017 and a law-firm primer dated December 2017. Rules can change, so check the sources before you rely on any figure.
What the FCC actually regulates
Section 302 of the Communications Act of 1934 lets the FCC make reasonable rules on the interference potential of devices that emit RF energy. According to the Federal Register rule published November 2, 2017, such devices must demonstrate compliance before they can be imported to or marketed in the United States. That makes this a narrower question than whether a gadget is any good.
The scope is wide. The December 2017 primer says any product that emits RF radiation is regulated under Part 15, from digital coffeemakers to personal computers.
The FCC sorts devices by the amount and purpose of their emissions, according to the same primer. There are three groups:
- Incidental radiator: a device not designed to intentionally use, generate or emit RF energy exceeding 9 kHz, but whose function may cause emissions over that threshold, such as a basic electrical power tool.
- Unintentional radiator: a device that emits radio frequency signals to other parts of the device or to an attendant device, such as a universal remote control.
- Intentional radiator: a device that intentionally generates and emits RF energy, like a Wi-Fi router, garage door opener or radio frequency identification device reader.
The group a product falls into shapes which approval route it needs. A Wi-Fi router, for example, is named in the primer as an intentional radiator, which matters for the certification route described below.

Certification versus Supplier’s Declaration of Conformity
Strictly speaking, certification is only one way to get a device authorized. The primer explains that a Part 15 device formerly needed to pass through one of three possible doors to reach the market: certification, verification, or Declaration of Conformity.
The FCC’s rule effective November 2, 2017 replaced two of those procedures, Declaration of Conformity and verification, with a single process called Supplier’s Declaration of Conformity (SDoC). The Federal Register notice describes both older routes as self-approval processes. Certification was left in place.
In practice, the two surviving routes differ in who checks the work:
- Certification is the most stringent route. It is used for devices that need more complex testing, use new technology or present a high risk of causing RF interference.
- SDoC is self-approval. The responsible party tests the equipment against specified standards and supplies a statement with the product saying it complies, but accredited-laboratory testing is no longer required.
The primer, dated December 2017, adds that responsible parties could keep using the previous self-approval processes for one more year. It also says equipment already approved through the old Declaration of Conformity or verification routes may be grandfathered in until the end of its useful life, as long as it is not modified in a way that would require new authorization.
What FCC certification involves for electronics
The primer states that most intentional radiators must go through certification. So must some high-power unintentional radiators, such as radar detectors and scanning receivers.
Certification requires the responsible party to submit a highly detailed application and have the device evaluated by the FCC or by an accredited independent Telecommunication Certification Body (TCB). A TCB must be recognized by the FCC’s Office of Engineering and Technology and must satisfy the ISO/IEC 17025 standard.
The Office of Engineering and Technology runs the day-to-day program, according to the Federal Register notice. A device that passes this route ends up carrying an FCC Identifier, which the labels section below covers.
Who is the responsible party?
Every authorized device has a responsible party who answers for compliance. Who that is depends on the route, as the primer lays out:
- For certified devices, it is the party to whom the FCC issued the grant of certification.
- For SDoC devices, it is generally the manufacturer or the assembler, and it must be located in the United States.
- If SDoC equipment is imported, the importer is the responsible party.
- Retailers or other equipment manufacturers may also contract to become the new responsible party.
- If another party modifies the equipment, that entity becomes responsible for compliance.
The same rule that created SDoC also removed the requirement to file the import declaration FCC Form 740 under certain circumstances, per the Federal Register summary. Importers should read the rule itself to see which circumstances apply.
Labels and user information
What you see on a product depends on the route. Per the primer, equipment subject to certification must be labeled with its FCC Identifier and a device-specific statement under Section 15.19 of the FCC’s rules.
A self-approved device must instead carry unique product identification such as name and model, the applicable compliance statements and the responsible party’s contact information. That information may sit in the user manual or on a website rather than on the device, and inclusion of the FCC logo is now voluntary.
The FCC said a compliance statement offers assurance that equipment has been determined to be compliant for use in the United States, according to the Federal Register notice. It added that the statement conveys information a consumer cannot independently ascertain from the logo alone.
Devices with digital displays may now show required labels electronically. The information must be reachable in no more than three sequences from the device’s settings menu.
What should you check before buying or selling a device?
Start with the paperwork that travels with the product. For a certified device, look for the FCC Identifier on the label or in the electronic label menu. For a self-declared device, look for the compliance statement and the responsible party’s contact details in the manual or on a website.
The stakes are real for sellers. The primer says the FCC has been vigilant in its enforcement against companies that fail to obtain appropriate equipment authorization or otherwise violate Part 15 rules. It also says its overview is general information and urges anyone with specific Part 15 questions to seek advice from counsel.
If you also sell outside the US, the separate question of what does ce marking mean on electronics is worth reading next. For the money side of selling devices, see the piece on electronics retail margins.
Frequently asked questions
Is FCC certification the same as FCC approval?
Show answer
Not quite. Certification is the most stringent of the authorization routes, while SDoC is a self-approval process that has been in place since the rule effective November 2, 2017, according to the Federal Register notice. Both exist so devices meet the FCC’s technical rules.
Does an FCC logo prove a device was certified?
Show answer
No. The primer says inclusion of the FCC logo is now voluntary for self-approved devices. For certified equipment, the FCC Identifier is the label element to look for.
Do ordinary household gadgets fall under these rules?
Show answer
Often yes. The primer says everyday devices, from digital coffeemakers to personal computers, emit radio frequency radiation and are subject to Part 15 equipment authorization procedures. Which route applies depends on the device.
Who runs the FCC’s equipment authorization program?
Show answer
The Office of Engineering and Technology administers its day-to-day operation, according to the Federal Register notice. It provides supplemental guidance through public notices and an online Knowledge Database.



